Product Introduction: Bently Nevada 330101-00-10-10-02-00

The Bently Nevada 330101-00-10-10-02-00 is a premium-quality proximity probe designed to operate within the renowned 3300 XL series by Bently Nevada, a GE brand. This particular model offers enhanced reliability, extended temperature tolerance, and long-term performance in industrial condition monitoring systems. It is typically employed in conjunction with Bently Nevada proximity transducers and monitors to provide accurate measurements of shaft displacement, vibration, and position in critical rotating machinery.

It is engineered with robust materials, allowing it to perform efficiently even in harsh environmental conditions, including high vibration, oil splashes, and temperature fluctuations. The 330101-00-10-10-02-00 model is frequently used across power generation, oil & gas, petrochemical, and industrial manufacturing sectors.

This proximity probe provides precise non-contact measurements and supports long cable lengths without signal degradation, ensuring optimal data collection for preventive maintenance and machinery protection.

Product Advantages

• High Reliability: Designed for continuous operation in critical applications with high mechanical stability and noise immunity.

• Enhanced Measurement Accuracy: Provides accurate vibration and displacement readings even under dynamic machine conditions.

• Rugged Design: Withstands harsh environments such as high temperature, pressure, and corrosive conditions.

• Long Cable Length Capability: Can be used with extended cable runs without signal loss, improving flexibility in installation.

• Compatibility: Fully compatible with Bently Nevada 3300 XL Proximitor and monitor systems.

• Easy Installation and Maintenance: Modular design simplifies installation and future maintenance or replacement.

Technical Specifications

Product Applications

The Bently Nevada 330101-00-10-10-02-00 proximity probe is widely used in the following applications:

• Turbomachinery Monitoring: Measures shaft displacement and vibration in steam and gas turbines.

• Pumps & Compressors: Enables condition-based maintenance by monitoring vibration signatures.

• Motors & Generators: Helps detect shaft misalignment and unbalance for large industrial motors.

• Gearboxes: Monitors gear mesh vibration and dynamic movement of rotating components.

• Oil & Gas Facilities: Suitable for machinery used in refineries, offshore platforms, and petrochemical plants.

• Power Generation: Used for generator and turbine monitoring to prevent catastrophic failures.

Compatible Models for Use

The 330101-00-10-10-02-00 is typically used in combination with the following Bently Nevada components:

• 3300 XL Proximitor Sensor (3300 XL 5mm or 8mm)

• 3300 XL Extension Cable

• 3300/16 Monitor System

• 3500/40M Proximitor Monitor

• 3500/22M Transient Data Interface Module

• 3300 XL NSv System for narrow installations

Installation Instructions

1. Preparation: Ensure the machine is powered down and safe to work on. Confirm the probe type, length, and connector match the installation specifications.

2. Mounting the Probe:

   • Drill and tap the mounting hole to fit the 3/8-24 UNF-2A thread.

   • Insert the probe until the tip is approximately 1 mm from the shaft surface.

   • Use a feeler gauge to adjust the gap for accurate calibration.

3. Securing the Cable:

   • Route the cable away from heat sources and moving parts.

   • Use stainless steel clamps to secure the armored cable along its path.

4. Connecting to Extension Cable:

   • Connect the probe to the extension cable using the miniature coaxial connector.

   • Ensure the connector is tightly fastened and sealed (if applicable).

5. Wiring to Proximitor:

   • Plug the extension cable into the corresponding Proximitor input.

   • Verify that the Proximitor module is powered and functioning.

6. Testing:

   • Use a voltmeter to check bias voltage.

   • Perform system calibration as per OEM instructions.

7. Final Checks:

   • Re-secure machine covers.

   • Power on the system and monitor for correct readings.

6 Related Models from the Same Series

8 Popular Bently Nevada Models

FAQ (Q&A Format)

Q1: What is the primary function of the 330101-00-10-10-02-00?
A1: This probe is designed to measure the vibration and shaft displacement of rotating machinery using non-contact eddy current technology.

Q2: Can this proximity probe be used in hazardous environments?
A2: Yes, it is engineered with durable stainless-steel housing and can operate in harsh industrial environments, including those with oil, heat, and vibration.

Q3: How should the probe be installed for optimal performance?
A3: Ensure the tip is positioned at the correct gap (typically around 1 mm) from the shaft surface, and the cable is properly secured and routed to avoid noise and mechanical wear.

Q4: What Proximitor does this model work with?
A4: It is fully compatible with the Bently Nevada 3300 XL Proximitor Sensor, as well as older Proximitor models depending on system design.

Q5: What is the maximum operating temperature this probe can withstand?
A5: It can operate in temperatures ranging from -35°C to +175°C, making it suitable for most industrial environments.

Q6: Is this model available in different cable lengths?
A6: Yes, the model can be configured with standard lengths such as 5 ft, 10 ft, 15 ft, and custom lengths based on application requirements.